Polymer Modified Powder For Crack Filling.
Rhino Crackseal – Powder is a cement based polymer modified powder material for filling cracks in plastered surface. It is composed of cement, properly selected aggregates, polymer & additives which requires on site addition of water only.
Features:
- Accommodates movements in the cracks.
- Over coatable after curing.
- Single component and needs only mixing with water.
- Replaces costly sealants and putties.
- No shrinkage.
- Excellent adhesion.
- It can be used as putty on plastered surfaces in patch works.
Application Areas :
- To fill the static cracks of 3 to 5 mm sizes in horizontal or vertical areas of buildings & structures.
- To level the undulation of the unplastered or plastered ceilings and walls before painting.
- To provide smooth finish to brick, stone, and wood works.
Properties :
Suface Preparation & Application :
- Remove old caulk from joints.
- The edges of the joints should be neat and sound. Make sure that surface is clean & free from loose debris and puddle of water.
- Contaminations of oil, grease or bitumen should be completely cleaned.
- For crack filling – Fill the mixed paste into the crack by spatula or putty knife blade. Fill excess material and tool it by putty knife blade pressing against crack so that air voids get filled.
Packing : 1kg & 5kg
Storage & Self Life : Shelf life is 12 months in sealed container. Store away from sunlight and preferably
below 30°C. Storage should be frost protected.
