Polyester Resin Based Anchor Grout.
Mahagrout Anchorfix is polyester resin based grout material carefully blended with a curing compound and fillers and supplied as a pre
measured, two-part, resin grout. It is a specially formulated fast setting, high
strength, and corrosion resistant grout suitable for anchoring of bolts & bars
into concrete, masonry, rock and metal surfaces. It is used where the difference between the hole diameter and bar diameter is < 25mm.
Features:
- Rapid setting and strength achievement.
- No expansion, no shrinkage.
- Resistant to corrosion.
- Resistant to vibration.
- Shorter depth and smaller holes- reduced drilling costs.
Application Areas :
- It can be used where high speed of installation and early application of load is required.
- It can be used for rock bed anchors and fixing of marine equipment.
- it can be used for underwater operations.
- It can be used for permanent installation of reinforcement starter bars, foundation bolts, base plates, blasting, barriers and safety
fences, railway tracks, tie-back anchors, reinforcement doweling abutments, ground anchors for towers, cranes, dock sills etc.
Properties :
Method Of Application :
- Using the calculated volume of grout based on the below table, the grout should be poured steadily into the prepared holes.
- The anchor bar is then pressed into the hole to the required depth.
- Slight agitation of the bar will assist in achieving a complete bond.
- The bar should then be left undisturbed in the required position until the resin is set.
Packing : Mahagrout Anchorfix is available in 1kg kit.
Storage & Self Life : The shelf life of the product is up to 6 months if stored as per recommendations. Excessive exposure to sunlight and UV will result in the deterioration of the quality of the product and reduce its shelf life.
