Mahaguard Uniprime-11 is a specially developed product to enhance the bonding with Non-porous & porous substrates & subsequent coatings such as or waterproofing coating/membranes, paints etc.
Features:
- Easily applicable by brush
- Due to its low viscosity it penetrates deeply into the substrate
- Enhanced adhesion for various materials
- It remains unaffected by UV rays and weathering conditions
- Versatile and reliable performance
Typical Application:
- Used as a primer coat for all coating.
- Used as primer for non-porous substrate.
- Used as a sealer to seal porous substrates like concrete, sandstone etc.
- Improve adhesion on non-porous substrates such as metals, e.g. aluminum, stainless steel, galvanized steel, coated metals
Properties:
Surface Preparation : All surfaces should be sound, clean and dry. Concrete surfaces should have a light steel-trowel followed by a fine hair broom or equivalent finish which is dry and free of dust, oil and other contaminants. All high spots should be removed. Moss and laitance must be removed physically followed by treatment with fungicidal wash to kill any spores and inhibit further growth. After treatment wash down thoroughly with clean water and allow drying. All metal surfaces should be made clean of paint, oils, rust and other contaminants.
Consumption : Approximately 6 to 7m /L. It may vary depend on porosity of substrate.
Packing : 5L & 20L
Storage & Self Life : Store in a cool & dry place under shed away from heat. Shelf life is One year in original unopened conditions.