MAHASEAL PU – 600 is single component polyurethane based elastomeric sealant which cures under the effect of atmospheric humidity. It is highly elastic, tear and weather resistant.

Features:

• Excellent abrasion resistant.
• Excellent application characteristics.
• High Strength adhesion bonding.
• Excellent adhesion to a wide variety of substrates.
• Flexible & highly elastic.
• Non staining including hydrophobic staining.
• Damp surface tolerant.
• Low-dirt pick-up.
• High movement accommodation.
• Perform well in temperature range of -20°C to+80°C.

Surface Preparation :

• The substrates must be clean, dry & free from dust, oil, grease and any contaminants that could harm bonding.
• Check the compatibility of the solvent used with the substrates.
• When using solvents, extinguish all sources of ignition and carefully follow the safety and handling instructions given by the manufacturer or
  supplier.
• Apply a primer if necessary.
• If necessary, rub down metal surfaces by scrubber. Clean it after rubbing down. Allow the substrate to dry after degreasing.
• We recommend that concrete is cleaned with a metal brush before application.